• Small cutting discs for steel

Small cutting discs for steel

Small cutting disc Flexiarapid Super 50x1.0x6.0 Inox (630191000)
Quality class A 46-U 9 "Flexiarapid Super" Inox
  • High-output disc especially for processing stainless steel
  • Maximum cutting output with very long tool life by using special corundums. Free from iron, sulphur and chlorine (Fe + S + Cl ≤ 0.1 %), for all rust and acid resistant steels (V2A, Nirosta, INOX), spring steels, tool steels
  • For use in the manufacture of vehicles, containers, car bodies, switch cabinets etc. Cutting discs for quiet, precise cutting cuts without burrs
  • Hardness: hard
Diameter x thickness x bore Maximum speed Maximum working speed Sales unit / packaging unit Order no.  
50 x 1 x 6 mm 30600 rpm 80 m/s 1 / 50 630191000
50 x 2 x 6 mm 30600 rpm 80 m/s 1 / 25 630192000
76 x 2 x 6 mm 20100 rpm 80 m/s 1 / 25 630194000
76 x 1.1 x 6 mm 20100 rpm 80 m/s 1 / 50 630195000
Flexiamant Super 50x6.0x6.0 steel (630187000)
Quality class A 24-Q "Flexiamant Super" steel
  • Universal disc for all aspects of metal processing, particularly suitable for deburring and grinding edges, also for cast processing
  • Hardness: hard
  • Good material removal with extremely good tool life
Diameter x thickness x bore Maximum speed Maximum working speed Sales unit / packaging unit Order no.  
50 x 6 x 6 mm 30600 rpm 80 m/s 1 / 25 630187000
Mounting arbor for small cutting discs
Order no.  
Mounting arbor for small cutting discs (630189000)
  • For mounting small cutting and grinding discs on die grinders
  • Safety note: When using this mounting arbor, the highest permitted speed must be observed. The mounting arbor is to be used with the mounted disc until the highest permitted speed: disc Ø 50 mm: max. permitted speed: 19,100 min; disc Ø 76 mm: max. permitted speed: 12,500 min

Shaft Ø: 6 mm
630189000