• Multi-purpose hole saw "pionier"

Multi-purpose hole saw "pionier"

Multipurpose hole saw 25 mm Pionier (627001000)
Multipurpose hole saw "Pionier", carbide tipped, with M 16 female thread
  • Carbide teeth supported on both sides and enlarged brazed contact areas guarantee a secure fit and a high-strength connection of material.
  • Improved vibration characteristics by means of the special curved geometry of the enlarged chip room and the clean-out slot.
  • Ideal for electricians, tile layers, sanitation installers, heater contractors, cabinet makers, kitchen studios, artisans
  • For solid wood, plywood, chipboard, plastics, acrylic glass, tiles (up to scratch hardness 6), plaster concrete blocks, aerated concrete, wood-wool boards, fibre cement, solid brick
  • Maximum cutting depth 60 mm
  • Only use in rotary mode, turn off impact. Use hole saws only with arbor and pilot drill.
Diameter Order no.  
25 mm 627001000
30 mm 627002000
35 mm 627003000
40 mm 627004000
50 mm 627005000
60 mm 627006000
63 mm 627007000
65 mm 627008000
68 mm 627009000
74 mm 627010000
80 mm 627012000
105 mm 627013000
Arbor SW 11, 118 mm, f. Pionier (627037000)
Arbors for multipurpose hole saws "Pionier"
  • Comfortable quick fastener for a fast change of the centre drill, without setscrew.
  • No tool loss in the event of accidentally switched-on impact mechanism: the shortened holding slots prevent impact operation on the hammer drills with SDS-plus holder, thereby not damaging the tool.
  • For working with the multi-purpose hole saws "Pionier"
  • Easy removal of the drilling core by unlocking the centre drill and pulling out the drilling core from the hole saw.
  • The spanner flats enable easy release of the adapter.
Shaft type Overall length Order no.  
SW11 118 mm 627037000
SDS-plus 220 mm 627039000
Pilot Drill
Order no.  
Carbide pilot drill 8x120mm for hole saws (627040000)
  • For work with the carbide core cutters (M16 female thread) and the universal hole saws "Pionier" (M16 female thread) in combination with one of the arbors

Diameter: 8 mm
Overall length: 120 mm
Working length: 80 mm
Sales unit: 1
627040000