• Diamond drill bits

Diamond drill bits

Diamond drill bit set for tiles "Dry", M14
Order no.  
Diamond drill bit set for tiles "Dry" 7 pieces, M14 (628321000)
  • M14 Thread for use on angle grinders
  • Long service life and fast drilling progress thanks to vacuum hard soldered diamonds
  • Easy removal of the drill core thanks to lateral recesses
  • No extra cooling required. . For Ø 6-14 mm an additional paraffin emulsion is integrated for improved cooling. We commend to briefly cool the tip with water in case of drilling in quick succession!
  • We recommend using the thickness of the tile / fine earthenware / granite board as useful length. As a rule, max. 2 cm granite boards / work boards up to 5 cm can be drilled. Retract the drill bit often from the drilled hole so that it can cool down!
  • Important: Do not drill into the subsurface in case of laid material!
  • Maximum working speed: 80 m/s
  • Set consisting of: 2 each Ø 6 mm, 2 x 8 mm, 1 each 10 mm, 12 mm, 14 mm

 628321000
       
Diamond drill bit set for tiles "Dry" , 3 pieces, M14 (628322000)
  • M14 Thread for use on angle grinders
  • Long service life and fast drilling progress thanks to vacuum hard soldered diamonds
  • Easy removal of the drill core thanks to lateral recesses
  • No extra cooling required. . For Ø 6-14 mm an additional paraffin emulsion is integrated for improved cooling. We commend to briefly cool the tip with water in case of drilling in quick succession!
  • We recommend using the thickness of the tile / fine earthenware / granite board as useful length. As a rule, max. 2 cm granite boards / work boards up to 5 cm can be drilled. Retract the drill bit often from the drilled hole so that it can cool down!
  • Important: Do not drill into the subsurface in case of laid material!
  • Maximum working speed: 80 m/s
  • Set consisting of: 1 each Ø 35 mm, 50 mm, 68 mm;

 628322000
       
Diamond drill bit set for tiles "Dry" 4 pieces, M14 (628319000)
  • M14 Thread for use on angle grinders
  • Long service life and fast drilling progress thanks to vacuum hard soldered diamonds
  • Easy removal of the drill core thanks to lateral recesses
  • No extra cooling required. . For Ø 6-14 mm an additional paraffin emulsion is integrated for improved cooling. We commend to briefly cool the tip with water in case of drilling in quick succession!
  • We recommend using the thickness of the tile / fine earthenware / granite board as useful length. As a rule, max. 2 cm granite boards / work boards up to 5 cm can be drilled. Retract the drill bit often from the drilled hole so that it can cool down!
  • Important: Do not drill into the subsurface in case of laid material!
  • Maximum working speed: 80 m/s
  • Set consisting of: 1 each Ø 35 mm, 40 mm, 50 mm, 68 mm

 628319000
       
Diamond drill bit set for tiles "Dry" 7 pieces, M14 (628317000)
  • M14 Thread for use on angle grinders
  • Long service life and fast drilling progress thanks to vacuum hard soldered diamonds
  • Easy removal of the drill core thanks to lateral recesses
  • No extra cooling required. . For Ø 6-14 mm an additional paraffin emulsion is integrated for improved cooling. We commend to briefly cool the tip with water in case of drilling in quick succession!
  • We recommend using the thickness of the tile / fine earthenware / granite board as useful length. As a rule, max. 2 cm granite boards / work boards up to 5 cm can be drilled. Retract the drill bit often from the drilled hole so that it can cool down!
  • Important: Do not drill into the subsurface in case of laid material!
  • Maximum working speed: 80 m/s
  • Set consisting of: each 1 x Ø 6 mm, 8 mm, 14 mm, 35 mm, 40 mm, 50 mm, 68 mm;

 628317000
       
Diamond drill bit set for tiles "Dry", 6 pieces, M14 (628320000)
  • M14 Thread for use on angle grinders
  • Long service life and fast drilling progress thanks to vacuum hard soldered diamonds
  • Easy removal of the drill core thanks to lateral recesses
  • No extra cooling required. . For Ø 6-14 mm an additional paraffin emulsion is integrated for improved cooling. We commend to briefly cool the tip with water in case of drilling in quick succession!
  • We recommend using the thickness of the tile / fine earthenware / granite board as useful length. As a rule, max. 2 cm granite boards / work boards up to 5 cm can be drilled. Retract the drill bit often from the drilled hole so that it can cool down!
  • Important: Do not drill into the subsurface in case of laid material!
  • Maximum working speed: 80 m/s
  • Set consists of: 1 each Ø 35 mm, 40 mm, 50 mm, 68 mm + diamond core bit 20 mm + diamond cup wheel 50 mm

 628320000
       
Diamond drill bit for tiles "Dry", 6 mm, M14 (628300000)
Diamond drill bits for tiles "Dry", M14
  • M14 Thread for use on angle grinders
  • Long service life and fast drilling progress thanks to vacuum hard soldered diamonds
  • Easy removal of the drill core thanks to lateral recesses
  • No extra cooling required. . For Ø 6-14 mm an additional paraffin emulsion is integrated for improved cooling. We commend to briefly cool the tip with water in case of drilling in quick succession!
  • We recommend using the thickness of the tile / fine earthenware / granite board as useful length. As a rule, max. 2 cm granite boards / work boards up to 5 cm can be drilled (applies to the diamond drill bits from Ø 20mm). Retract the drill bit often from the drilled hole so that it can cool down!
  • Important: Do not drill into the subsurface in case of laid material!
  • Maximum working speed: 80 m/s
Diameter Overall length Sales unit Order no.  
6 mm 64 mm 1 628300000
8 mm 64 mm 1 628301000
10 mm 64 mm 1 628302000
12 mm 64 mm 1 628303000
14 mm 64 mm 1 628304000
18 mm 91 mm 1 628305000
20 mm 91 mm 1 628306000
25 mm 91 mm 1 628307000
32 mm 91 mm 1 628308000
35 mm 91 mm 1 628309000
40 mm 91 mm 1 628310000
50 mm 91 mm 1 628311000
55 mm 91 mm 1 628312000
60 mm 91 mm 1 628313000
68 mm 91 mm 1 628314000
75 mm 91 mm 1 628315000
82 mm 91 mm 1 628316000
45 mm 91 mm 1 628318000
Diamond milling cutters "Dry" 20 mm/ M14 (628327000)
Diamond drill bit "Dry", M14
  • Diamont drill bit Ø 20 mm for routing, chamfering, drilling and widening
  • Useable length: 40 mm; overall length: 75 mm
  • Connection M14 for use with angle grinder Ø 115 + 125 mm
  • Maximum working speed: 80 m/s
Order no.  
628327000
Diamond cup wheel "Dry" 50 mm/ M14 (628328000)
Diamond cup wheel "Dry", M14
  • Powerful diamond cup wheel with turbo segments Ø 50 mm/ M14 female thread
  • Ideally suited for repair works and clean processing of edges without chipping
  • Extremely powerful also for smaller modelling work
  • Connection M14 for use with angle grinder Ø 115 + 125 mm
  • Maximum working speed: 80 m/s
Order no.  
628328000
Adapter for diamond drill bits "Dry"
Order no.  
Adapter hexagon 10 mm / M 14 (630859000)
  • For the use of diamond drill bits "Dry" for drills and impact drills

Holder: Hexagon 10 mm / M 14 male thread
630859000