UHEV 2860-2 Quick (600713500) Multi hammer

(220-240 V / 50 - 60 Hz); metaBOX 145 L; with Metabo Quick change chuck

UHEV 2860-2 Quick (600713500) Multi hammer
Order no.: 600713500 EAN: 4007430306234
Max. single blow energy (EPTA):
3.4 J
Maximum impact rate:
4500 bpm
Rated input power:
1100 W
Drill-Ø concrete with hammer drills:
28 mm / 1 3/32 "
Bit retainer:
SDS-plus
  • Multi hammer with 4 functions: hammer drilling, drilling without impact in two speeds and chiselling
  • Metabo Quick: quick change between SDS Plus hammer chuck and keyless chuck for drilling in wood and metal
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
  • Two-speed gear unit: two drilling speeds for effective drilling in wood and metal
  • Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly
more product information
Manual Spare-parts list
  • Multi hammer with 4 functions: hammer drilling, drilling without impact in two speeds and chiselling
  • Metabo Quick: quick change between SDS Plus hammer chuck and keyless chuck for drilling in wood and metal
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
  • Thumbwheel for preselection of the speed and impact rate
  • Two-speed gear unit: two drilling speeds for effective drilling in wood and metal
  • Metabo Marathon-motor with dust protection for long service life
  • High performance hammer action, precisely mounted in a housing made of aluminium alloy: long-lasting and robust
  • Perfect ergonomics thanks to the centre of gravity being near the hand and optimised handle contour
  • Bottom switch protected against damage and dust
  • Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly
  • Restart protection: prevents unintentional start-up after power supply interruption
  • Lockable switch for comfortable working in continuous operation
  • Cable-protecting ball joint for optimal freedom of motion when working
  • With metaBOX, the intelligent solution for transport and storage
The machine shown may differ in equipment and technical details depending on the configuration.
Kindly pay attention to delivery scope and product description.
Accessories included only if listed in the delivery scope.
Characteristics
Max. single blow energy (EPTA)
3.4 J
Maximum impact rate
4500 bpm
Rated input power
1100 W
Drill-Ø concrete with hammer drills
28 mm / 1 3/32 "
Drill-Ø masonry with core bits
68 mm / 2 11/16 "
Drill Ø steel
13 / 6 mm // 1/2 / 1/4 "
Drill-Ø soft wood
35 / 30 mm // 1 3/8 / 1 3/16 "
No-load speed
0 - 900 / 0 - 2100 rpm
Speed at rated load
900 / 2100 rpm
Bit retainer
SDS-plus
Collar diameter
50 mm / 1 31/32 "
Weight (without power cable)
3.3 kg / 7.4 lbs
Cable length
4 m / 13 ft
Vibration
Drilling in metal
4.3 m/s²
Uncertainty of measurement K
1.5 m/s²
Hammer drilling concrete
13.5 m/s²
Uncertainty of measurement K
1.5 m/s²
Chiseling
7.2 m/s²
Uncertainty of measurement K
1.5 m/s²
Noise emission
Sound pressure level
90 dB(A)
Sound power level (LwA)
99 dB(A)
Uncertainty of measurement K
3 dB(A)
  • Hammer chuck for tools with SDS-plus shank end
  • Drilling depth guide
  • metaBOX 145 L
  • Keyless chuck for tools with cylindrical shank
  • rubber-coated side handle