Environment, health, safety

Circular economy and sustainability

Durability
A significant quality characteristic of all Metabo products is a long service life. Each product must meet particular minimum requirements.
Repairability
All Metabo products can be repaired. For spare parts, availability for at least 8 years after end of the series production is guaranteed.
Re-use
With all cordless products, battery pack and tool can be separated. This means that each component can be reused.
Recyclability
All Metabo products and packaging can be recycled.

Use of recycled material
Packaging, especially carton packages, are manufactured from recycled material to a very high degree. In products, provided that safety and quality requirements permit, metals and plastics from recycling are used.
Critical raw materials (conflict mineral)
Metabo meets the requirements of (EU) 2017/821 and the Dodd-Frank-Act.
Energy and material efficiency
With regard to energy efficiency, Metabo products have a very high degree of efficiency. The weight optimisation of the handheld products result in high material efficiency.

Regulation (EC) No. 1907/2006 (REACH)

Compliance with laws and provisions is a matter of course to us as a renowned German brand manufacturer. Within the sense of REACH, we are a “downstream” user. We therefore supply "preparation" and "products".

In concrete terms this means:

According to article 33 of regulation (EC) no. 1907/2006 (REACH), distribution companies of products (machines, accessories, as well as components and spare parts) that contain one or several so-called substances of very high concern (SVHC) in a concentration exceeding 0.1% weight by weight, are subject to particular information requirements. Substances identified as of very high concern are included into the so-called candidate list by the European Chemicals Agency (ECHA).
Obviously, we comply with our obligation to inform according to article 33:
Products that contain one or several SVHC are recorded in the SCIP database.
According to the information available from our suppliers, we assume that the registration of substances listed in annex 14 has been carried out in due time.
According to our current knowledge, none of our items contains substance fractions of the substances listed in annex 17, which would prohibit placing these items on the market.
Safety instructions can be found in the Metabo service portal.

REACH: SVHC in products

According to available information, almost all Metabo products contain components, in which lead (CAS no. 7439-92-1) as alloy element, e.g. in steel or copper, in concentrations exceeding 0.1% weight in weight is contained. The use of this substance conforms with the applicable derogations. If used as intended, the products do not pose any hazard to the health or environment. Safety instructions are not required.

For further questions please send an email to product-compliance@metabo.de.

Information on the disposal of battery packs and used electrical appliances

Environmentally-friendly products are anchored in our mission statedment and in our Code of Conduct. Therefore, as renowned brand manufacturer we naturally meet the requirements of the European Regulation 2012/19/EU (WEEE).

Our power tools are marked with the symbol of a crossed-out waste bin. This means that old electrical appliances must not be disposed of as residual waste.
Consumers are required to return these to a suitable public collection point, a Metabo specialist dealer or at the Metabo service free of charge.
If you use a communal collection point to dispose of your devices, please remove the battery pack in cordless devices and dispose of it separately and in an environmentally-friendly way using a suitable collection system.
Old devices contain important raw materials that can be recycled in keeping with recycle management.

Metabo is registered with the EAR for disposal and recycling of used electrical equipment and battery packs under:
WEEE reg. no. DE 84054365 / batt. reg. no. DE 17739257

For further questions please send an email to product-compliance@metabo.de.

IMPORTANT INFORMATION ABOUT THE USE OF LI-ION BATTERY PACKS FOR OUR CORDLESS TOOLS

Please use only the original battery packs/chargers intended by us or battery packs/chargers of our CAS partners. These are designed for use with our cordless tools as well as those of our CAS partners and guarantee highest possible efficiency and safety.

We cannot guarantee the safety nor the efficiency, if other battery packs/chargers than those original ones manufactured by us or our CAS partners. This also applies if the battery packs/chargers are opened or the original state is modified in any way.

The use of battery packs or chargers that are not manufactured by us or one of our CAS partners (third party battery packs and chargers) can lead to serious safety risks such as risk of fire or explosion.

We also wish to point out that any warranty claims with regard to our products are voided if third party systems are used.

Safety recommendations

Lithium-ion cordless tools

Safety recommendations for the transport and handling of Lithium-ion battery packs

Due to their very high energy density, lithium-ion battery packs are particularly suited for mobile applications. Many safety mechanisms are already integrated in the system and guarantee a safe product whilst ensuring safe working. The high energy content also requires additional measures and rules for damage prevention when handling and transporting the battery packs.

Here you find information and safety recommendations about lithium-ion battery packs:

DOWNLOAD

Cutting and grinding accessories

Safety recommendations for proper use of cutting and grinding accessories

DOWNLOAD

Safety information

DOWNLOAD

Packaging

Directive 94/62/EC (PPWD)

The product and transport packaging of our products meet the requirements of the EU guidelines on packaging and packaging waste.
Our packaging does not contain any prohibited substances and can be recycled in the national system for packaging recycling.
The packaging is made from recyclable materials.

Packaging composed of several components can be easily separated.
Carton packaging consists to a very high degree of recycled materials.
Product packaging are marked with the packaging material used and icons for sorting instructions according to the PPWD.

The product and transport packaging participate in the system according to the Packaging Act, and are registered with the ZSVR under registration number DE2741005875312.
Packaging that does not participate in the system can be taken back.