• Multi-purpose hole saw "pionier"

Multi-purpose hole saw "pionier"

Pilot Drill
Order no.
Pilot drill HSS, 7.4x120 mm (627088000)
  • For work with the carbide core cutters (M16 female thread) and the universal hole saws "Pionier" (M16 female thread) in combination with one of the arbors

Diameter: 7.4 mm / 0.281 "
Overall length: 120 mm / 4.718 "
Working length: 70 mm / 2 3/4 "
Sales unit: 1
627088000
     
Carbide pilot drill, 8x130 mm, M 16- diamond socket countersink (628207000)
  • For work with the diamond socket countersinks (M16 female thread) in combination with one of the arbors: 627043000, 627042000, 625224000 and 627041000
  • cannot be used with arbors "Quick" 627037000, 627038000 and 627039000

Diameter: 8 mm / 0.312 "
Overall length: 130 mm / 5 1/8 "
Working length: 80 mm / 3.156 "
Sales unit: 1
628207000
     
Carbide pilot drill 8x120mm for hole saws (627040000)
  • For work with the carbide core cutters (M16 female thread) and the universal hole saws "Pionier" (M16 female thread) in combination with one of the arbors

Diameter: 8 mm / 0.312 "
Overall length: 120 mm / 4.718 "
Working length: 80 mm / 3.156 "
Sales unit: 1
627040000
     
Multipurpose hole saw 25 mm Pionier (627001000)
Multipurpose hole saw "Pionier", carbide tipped, with M 16 female thread
  • Carbide teeth supported on both sides and enlarged brazed contact areas guarantee a secure fit and a high-strength connection of material.
  • Improved vibration characteristics by means of the special curved geometry of the enlarged chip room and the clean-out slot.
  • Ideal for electricians, tile layers, sanitation installers, heater contractors, cabinet makers, kitchen studios, artisans
  • For solid wood, plywood, chipboard, plastics, acrylic glass, tiles (up to scratch hardness 6), plaster concrete blocks, aerated concrete, wood-wool boards, fibre cement, solid brick
  • Maximum cutting depth 60 mm
  • Only use in rotary mode, turn off impact. Use hole saws only with arbor and pilot drill.
Arbor SW 11, 118 mm, f. Pionier (627037000)
Arbors for multipurpose hole saws "Pionier"
  • Comfortable quick fastener for a fast change of the centre drill, without setscrew.
  • No tool loss in the event of accidentally switched-on impact mechanism: the shortened holding slots prevent impact operation on the hammer drills with SDS-plus holder, thereby not damaging the tool.
  • For working with the multi-purpose hole saws "Pionier"
  • Easy removal of the drilling core by unlocking the centre drill and pulling out the drilling core from the hole saw.
  • The spanner flats enable easy release of the adapter.
Shaft type Overall length Order no.
SW11 118 mm 627037000
SDS-plus 220 mm 627039000