• Grinding, polishing, stirring

Grinding, polishing, stirring

Drill stand
Order no.
Drill stand 890 (600890000)
  • The design of the feed mechanism enables the maximum drilling depth of 65 mm to be achieved with a swivelling motion
  • Asymmetrical arrangement of the column in relation to the base plate enables the processing of larger workpieces
  • Unlimited access to the controls of drill and drill stand by angled cantilever
  • No risk of injury or drill breakage thanks to the safe adjustment of the device carrier to the required working height
  • Adjustable depth guide

Distance, bit centre to column: 165 mm / 6 1/2 "
Working stroke: 65 mm / 2 9/16 "
Height of column: 500 mm / 20 "
Column Ø: 40 mm / 1 9/16 "
Aperture: 43 mm
Base plate: 220 x 213 mm // 8 21/32 x 8 3/8 "
Weight: 5.5 kg / 12.13 lbs
600890000
     
Magnetic drill stands
Order no.
Magnetic drill stand M 100 (627100000)
  • Magnet base with high holding power for safe operation
  • Also suitable, when used in conjunction with the safety chain supplied, for working on vertical, sloping, or overhead surfaces
  • Vertical feed driven by rack and pinion
  • In order to position the tip of the drill bit that is fitted in the drill exactly over the punch mark on the material to be drilled, the upper part of the magnetic drill stand can be swivelled and moved sideways
  • Power socket on the drill stand for connecting the drill directly
  • The drill fitted to the drill stand cannot be started until the drill stand itself has been switched on
  • Adjustable support to back up the stand against the high reacting forces that arise when drilling
  • Graduated collar indicating the depth to which the hole is drilled
  • Can be complemented with the drill B 32/3 to a magnetic drill unit with max. drill diameter 100 mm (with core hole drill).

Aperture: 65 mm
Depth of feed: 260 mm / 10 1/4 "
Maximum height: 650 mm / 25 19/32 "
Magnetic force (maximum): 18000 N / 1631.4 lbs
Dimensions magnet base: 110 x 220 mm // 4 5/16 x 8 21/32 "
Weight: 22 kg
627100000
     
Wheel brush 75x0.3 mm/ 6 mm, stainless steel, crimped (630550000)
Steel-wire wheel brush, stainless steel crimped
  • For light surface processing and deburring work in all metal processing
  • For processing profiles, weld seams, cutting edges, gear wheels, grooves, narrow surfaces
  • Edging type: crimped stainless steel wire
Clamping shaft Ø Outer Ø Version Order no.
6 mm 75 mm Crimped 630550000
6 mm / 1/4 " mm 100 mm / 3.94 " mm Crimped 630551000
Cup brush 50x0.3 mm/ 6 mm, crimped steel (626790000)
Steel-wire cup brushes, crimped steel
  • For light surface processing and deburring work in all metal processing
  • For processing larger areas, weld seams, metal plates
Clamping shaft Ø Outer Ø Version Order no.
6 mm 50 mm Crimped 626790000
6 mm 75 mm Crimped 630552000
Busby-end brush 25x0.3 mm/ 6 mm, crimped steel (630554000)
Steel-wire Busby-end brush, crimped steel
  • For light surface processing and deburring work in all metal processing
  • For processing hard to reach spots and inner surfaces
Clamping shaft Ø Outer Ø Version Order no.
6 mm 25 mm Crimped 630554000
Rubber backing pad
Order no.
Rubber backing pad with clamping shaft for drills (623259000)
  • For clamping grinding media Ø 125 mm (e.g. fibre sanding discs)

Dimensions: 125 mm
Clamping shaft Ø: 8 mm
Sales unit: 1
623259000